PracticeHow it worksFeaturesPricingBlog Start practising free
Past Paper Solutions

Chemical Thermodynamics JEE 2016: Diffusion Coefficient

JEE Advanced 2016 Chemistry Chemical Thermodynamics Kinetic theory of gases and diffusion coefficient

By Founder, JEEnius - IIT Kanpur Alumni · Nov 18, 2026 · 4 min read

Medium 2 min target

The diffusion coefficient of an ideal gas is proportional to its mean free path and mean speed. The absolute temperature of an ideal gas is increased 4 times and its pressure is increased 2 times. As a result, the diffusion coefficient of this gas increases x times. The value of x is

Show answerAnswer

4

Explanation

The diffusion coefficient D is proportional to mean free path and mean speed.

D∝λv¯

For an ideal gas, mean free path is proportional to temperature divided by pressure.

λ∝TP

Mean speed is proportional to square root of absolute temperature.

v¯∝T

Therefore:

D∝TP×T

D∝T3/2P

Now temperature becomes 4T and pressure becomes 2P.

Initial diffusion coefficient:

D1∝T3/2P

Final diffusion coefficient:

D2∝(4T)3/22P

Now take the ratio:

D2D1=(4T)3/22P×PT3/2

D2D1=43/22

43/2=8

So:

D2D1=82

D2D1=4

Thus the diffusion coefficient increases 4 times.

Hence x=4.

Chemistry artwork for the article: Chemical Thermodynamics JEE 2016: Diffusion Coefficient

What is the answer to the Chemical Thermodynamics JEE 2016 diffusion question?

The diffusion coefficient becomes four times its initial value in this Chemical Thermodynamics JEE 2016 question. The source is JEE Advanced 2016, Paper 1, Chemistry, and the response format is a single-digit integer answer.

An ideal gas has a diffusion coefficient proportional to the product of its mean free path and mean molecular speed. Its absolute temperature and pressure change as follows:

T⟶4T,P⟶2P

Find the final-to-initial diffusion-coefficient ratio. The required answer is: x=4

Both mean free path and mean speed double. Their product, not either factor alone, gives the answer.

How do mean free path and mean speed determine the diffusion coefficient?

The governing dependence is absolute temperature raised to the three-halves power, divided by pressure. The official method combines the mean-free-path and mean-speed dependences first. Temperature affects both factors, so using only one loses part of the change.

The notation is:

D=diffusion coefficient,λ=mean free path,v¯=mean molecular speed

Mean free path is the average distance travelled between successive collisions. Mean molecular speed tells us how quickly the molecules move. The question supplies their connection to diffusion: D∝λv¯

For the ideal gas, mean free path depends on absolute temperature and pressure. For the same gas, mean speed depends on the square root of absolute temperature: λ∝TP v¯∝T

The gas identity remains unchanged, and the standard mean-free-path relation treats molecular collision size as fixed. These assumptions let us use the same proportionality constants before and after the change:

D∝TP×T=T1+1/2P=T3/2P

Here, temperature means absolute temperature in kelvin. Celsius readings cannot be used directly in these temperature ratios because their zero is not absolute zero.

How do we substitute the changes and obtain four?

Substitution gives a temperature contribution of eight and a pressure divisor of two, leaving a multiplier of four. Take the ratio rather than calculating either diffusion coefficient separately: the unchanged proportionality constant cancels.

Label the initial and final states:

T1=T,P1=P,T2=4T,P2=2P

Write both diffusion coefficients using the same proportionality constant:

D1=CT3/2P
D2=C(4T)3/22P

The constant is unchanged because we are considering the same gas under the stated assumptions. Divide the final expression by the initial expression:

D2D1=C(4T)3/22P×PCT3/2=43/22

Evaluate the power before dividing:

43/2=(4)3=23=8
D2D1=82=4⇒x=4

Check this within the same method by tracking each factor separately. Mean free path doubles, and mean speed doubles:

λ2λ1=4T/(2P)T/P=2
v¯2v¯1=4TT=2
D2D1=2×2=4

The requested quantity is the final-to-initial multiplier, not the fractional increase. Subtracting the initial value would answer a different question:

x=D2D1=4,D2−D1D1=4−1=3

Why does an incorrect calculation give two?

An answer of two results if you calculate only the mean-free-path change and mistake it for the diffusion-coefficient change. This is an integer-answer question, so two is an illustrative incorrect response, not a supplied multiple-choice option.

The faulty calculation starts with a valid relation but assigns its result to the wrong quantity:

λ∝TP⇒λ2λ1=42=2
Incorrect:D2D1=2

That step silently replaces the governing product with an incomplete dependence:

D∝λv¯⟶D∝λ

It holds mean speed constant even though temperature changes. Restoring the omitted speed factor repairs the calculation:

v¯2v¯1=4=2
D2D1=42×2=4

The mean-free-path calculation was correct; stopping there was the error. Write a ratio for every factor in the governing product before multiplying. This prevents a correct intermediate result from being mistaken for the final answer.

How can you test the same rule with three related questions?

Use the final-to-initial temperature ratio raised to the three-halves power, divided by the pressure ratio. The three questions below are original practice questions on the same kinetic-theory topic, not additional verified PYQs. Assume throughout: the same ideal gas, unchanged molecular collision size, and temperatures on the absolute scale.

D2D1=(T2/T1)3/2P2/P1

What happens if temperature doubles at unchanged pressure?

The diffusion coefficient becomes two times the square root of two times its initial value. The temperature change increases both mean free path and mean speed; unchanged pressure contributes no additional factor.

D2D1=23/21=22

Interpretation: this is the combined temperature effect. Mean free path doubles, and mean speed gains a square-root-of-two factor.

What happens if pressure triples at unchanged temperature?

The diffusion coefficient falls to one-third of its initial value. Since temperature stays fixed, mean speed stays fixed too; only the mean free path changes.

D2D1=13/23=13

Interpretation: this is pressure-only suppression. Tripling pressure reduces mean free path, and therefore diffusion coefficient, to one-third.

How must pressure change when temperature quadruples but diffusion stays unchanged?

Pressure must become eight times its initial value. Quadrupling temperature contributes a factor of eight to the combined temperature dependence, so pressure must provide an equal divisor.

1=43/2P2/P1=8P2/P1
P2P1=8

Interpretation: this is exact compensation, not merely matching the temperature multiplier. Check it by writing the two factors separately:

λ2λ1=48=12,v¯2v¯1=2,D2D1=12×2=1

Cover the worked answers and write the mean-free-path and mean-speed ratios for each question. Multiply them before checking your final results.

Next step: the past-paper archive on JEEnius and search every JEE Main paper from 2002 and every Advanced paper from 2007, by year, subject or chapter, each with a worked solution (free).

If that step was the hard part, work through Bohr Model of Hydrogen Atom JEE 2017: Minimum Final Orbit.

Frequently asked questions

What is the answer to the JEE Advanced 2016 diffusion coefficient question?

The single-digit integer answer is 4: the final diffusion coefficient is four times its initial value. When absolute temperature quadruples and pressure doubles, mean free path and mean molecular speed both double.

How does the diffusion coefficient depend on temperature and pressure?

For the same ideal gas with unchanged molecular collision size, D is proportional to T^(3/2)/P. This follows by multiplying the mean-free-path dependence, T/P, by the mean-speed dependence, sqrt(T). Temperature must be measured in kelvin.

Why is the diffusion coefficient ratio 4 and not 2?

The ratio of 2 accounts only for the change in mean free path when temperature quadruples and pressure doubles. Mean molecular speed also doubles, so the diffusion coefficient ratio is 2 × 2 = 4.

How must pressure change if temperature quadruples but diffusion stays constant?

For the same ideal gas with unchanged molecular collision size, pressure must become eight times its initial value. Quadrupling absolute temperature multiplies T^(3/2) by 8, so pressure must increase by the same factor to keep D unchanged.

chemical thermodynamicsdiffusionjee advancedkinetic theorymean free path

Practise this with JEEnius AI

25 years of PYQs and AI doubt solving, plus 10 free 2027 predicted questions.

Start practising free