PracticeHow it worksFeaturesPricingBlog Start practising free
Past Paper Solutions

Solutions JEE 2016: Molarity, Molality and Mole Fraction

JEE Advanced 2016 Chemistry Solutions Relation between mole fraction, molarity, molality and density

By Founder, JEEnius - IIT Kanpur Alumni · Nov 19, 2026 · 4 min read

Hard 2 min target

The mole fraction of a solute in a solution is 0.1. At 298 K, molarity of this solution is the same as its molality. Density of this solution at 298 K is 2.0 g cm−3. The ratio of the molecular weights of the solute and solvent, MWsoluteMWsolvent, is

Show answerAnswer

9

Explanation

Let the mole fraction of solute be Xs.

Xs=0.1

So the mole fraction of solvent is:

Xsolvent=0.9

Let molecular weight of solute be Ms and molecular weight of solvent be Mw.

Take 1 L of solution.

Density is 2.0 g cm−3.

Mass of 1 L solution is:

mass of solution=2.0×1000

mass of solution=2000 g

Let molarity be M. In 1 L solution, moles of solute are:

ns=M

Molality is moles of solute per kg of solvent.

Since molarity equals molality:

M=nsmass of solvent in kg

But ns=M, so:

M=Mmass of solvent in kg

Therefore:

mass of solvent=1 kg

mass of solvent=1000 g

Hence mass of solute is:

mass of solute=2000−1000

mass of solute=1000 g

So the masses of solute and solvent are equal.

Now use mole fraction of solute:

Xs=nsns+nw

0.1=nsns+nw

ns+nw=10ns

nw=9ns

Now masses are equal:

nsMs=nwMw

Substitute nw=9ns:

nsMs=9nsMw

Ms=9Mw

Therefore:

MsMw=9

So the required ratio is 9.

Chemistry artwork for the article: Solutions JEE 2016: Molarity, Molality and Mole Fraction

What is the answer to the Solutions JEE 2016 concentration question?

The answer is 9 for this Solutions JEE 2016 question from JEE Advanced 2016, Paper 1, Chemistry, chapter Solutions. It asks for the solute-to-solvent molecular-weight ratio when the solute mole fraction is 0.1, molarity and molality are numerically equal, and the temperature and solution density are:

T=298 K,ρ=2.0 gcm−3

This is a single-digit integer-answer question, not an MCQ with supplied options. The question bank tags it as medium difficulty and gives a 150-second benchmark; neither is an exam-authority rating.

The official one-litre method separates two facts: concentration equality fixes the solvent mass. Density fixes the total solution mass.

Why choose one litre, and what is its solution mass?

Choose 1 L of solution to make the solute mole count numerically equal to the molarity. Its total mass is 2000 g, calculated from the given density. This is solute plus solvent, not solvent alone. Choosing a sample size does not change its composition or concentration.

Use the notation:

Xs&=solute mole fraction,Ms&=solute molecular weight,Mw&=solvent molecular weight.

The solvent mole fraction is:

Xw=1−Xs=1−0.1=0.9

Convert the volume to match the density units, then multiply. The cubic-centimetre units cancel, leaving grams.

1 L=1000 cm3
Mass of solution&=density×volume&=(2.0 gcm−3)(1000 cm3)&=2000 g.

How do equal molarity and molality give one kilogram of solvent?

The solvent mass is 1 kg because molarity and molality divide the same nonzero solute mole count by numerically equal denominators. Those denominators are solution volume in litres and solvent mass in kilograms. With one litre of solution, the solvent mass must be one kilogram.

Let:

M=numerical molarity in molL−1

The chosen sample therefore contains: ns=M mol

Molality uses solvent mass, not solution mass. In numerical-value form:

m=ns in molsolvent mass in kg

The given equality applies to numerical values in the conventional units. It does not make those units dimensionally identical. M=m

molL−1≠molkg−1

Substituting the numerical solute mole count gives:

M=Msolvent mass in kg

The solute mole fraction is nonzero, so cancel the common numerator. Then subtract the solvent mass from the total solution mass.

Mass of solvent=1 kg=1000 g
Mass of solute=2000−1000=1000 g

Solute and solvent have equal masses here. The given density is essential to this conclusion: concentration equality alone fixes the solvent mass in this sample, not the solute mass.

How does the mole fraction give a molecular-weight ratio of 9?

The solvent has nine times as many moles as the solute. Since their masses are equal, each mole of solute must weigh nine times as much as each mole of solvent. Start with the mole-fraction definition, then use the equal-mass result.

Let:

ns=moles of solute,nw=moles of solvent

The definition and substitution give:

Xs=nsns+nw
0.1=nsns+nw

ns+nw=10ns nw=9ns Equal component masses give: nsMs=nwMw

Substitute the solvent mole count, then cancel the nonzero solute mole count: nsMs=9nsMw Ms=9Mw

MsMw=9

The integer to enter is 9. Check the direction: the solute has one-ninth as many moles but the same mass. Its molecular weight must therefore be nine times the solvent’s, not one-ninth.

Why is 1 a wrong answer even though the component masses are equal?

Equal masses imply equal molecular weights only when the mole counts are also equal. Here, the solvent has nine times as many moles. No wrong options were supplied for this integer-answer question, so 1 is a derived wrong answer, not an official option.

The invalid route is:

Solute mass&=solvent mass&⇓ invalid inferenceMs&=MwMsMw&=1

That inference drops the mole-count factor. The mass relation requires:

Mass=number of moles×molar mass

nsMs=nwMw The correct equality cannot be replaced by equal molecular weights. Substituting the known mole ratio shows why:

nw&=9nsnsMs&=9nsMw

Nine times as many solvent moles share the same component mass. Each solvent mole therefore has one-ninth the mass of a solute mole. Keep the mole-count factors until you substitute the given mole ratio.

What two follow-up questions test the same distinction?

The mass fraction can be found exactly, but the common concentration value cannot be found as a unique number. Both questions below are original follow-up practice using the given solution, not additional JEE 2016 PYQs.

What is the solute mass fraction, and why is it different from its mole fraction?

The solute mass fraction is 0.5 because the solute contributes half the total solution mass. Its mole fraction is 0.1 because it contributes only one-tenth of the total mole count.

Solute mass fraction=10002000=0.5
Solute mole fraction=nsns+nw=0.1

The denominators count total mass and total moles, respectively. Equal component masses do not mean equal shares of the mole count.

Can the common numerical molarity and molality be determined from these data alone?

No unique value follows because neither absolute molecular weight is fixed. For this numerical calculation, take:

Mw=numerical solvent molar mass in gmol−1

In the one-litre sample, divide the solvent mass by its molar mass, then use the mole ratio:

nw=1000Mw mol
ns=nw9=10009Mw mol

The common numerical concentration, in the respective conventional units, is:

M=m=10009Mw

The data determine a molecular-weight ratio, not either absolute molecular weight. Cover the working and reproduce the solvent-mass cancellation first, then use the mole ratio to recover 9.

Next step: photograph a doubt on JEEnius and photograph any question you are stuck on and get a step-by-step solution, with a free-body diagram when the question needs one (20 free).

If that step was the hard part, work through Thermal Properties of Matter JEE 2017: Body Radiation.

Frequently asked questions

What is the answer to the Solutions JEE 2016 concentration question?

The answer is 9, the solute-to-solvent molecular-weight ratio. In a one-litre sample, the given density and numerical equality of molarity and molality give equal solute and solvent masses. The solute mole fraction of 0.1 means the solvent has nine times as many moles, so the solute molecular weight is nine times the solvent molecular weight.

Why do equal molarity and molality give 1 kg of solvent?

Molarity divides solute moles by solution volume in litres, while molality divides the same solute moles by solvent mass in kilograms. For a nonzero solute mole count, numerical equality of these concentrations makes the denominators numerically equal. Choosing one litre of solution therefore gives one kilogram of solvent.

Why is the molecular-weight ratio 9 and not 1?

Equal component masses do not imply equal molecular weights unless their mole counts are also equal. Here, the solvent has nine times as many moles as the solute. Since mass equals moles multiplied by molar mass, the solute molecular weight must be nine times the solvent molecular weight.

Can we calculate the common molarity and molality from these data?

No unique numerical value can be calculated because neither absolute molecular weight is given. The data fix only the solute-to-solvent molecular-weight ratio. If the numerical solvent molar mass in g/mol is M_w, the common numerical concentration is 1000/(9M_w), in mol/L for molarity and mol/kg for molality.

jee 2016jee advancedmolalitymolaritymole fractionsolutions

Practise this with JEEnius AI

25 years of PYQs and AI doubt solving, plus 10 free 2027 predicted questions.

Start practising free