PracticeHow it worksFeaturesPricingBlog Start practising free
Past Paper Solutions

Trigonometric Identities JEE 2023: Cosine Product Solution

JEE Main 2023 Mathematics Trigonometry Trigonometric identities

By Founder, JEEnius - IIT Kanpur Alumni · Nov 16, 2026 · 4 min read

Hard 3 min target

The value of 36(4cos29∘−1)(4cos227∘−1)(4cos281∘−1)(4cos2243∘−1) is

Show answerAnswer

D

Explanation

Rewrite each factor: 4cos2θ−1=1+2cos2θ. The product becomes (1+2cos18∘)(1+2cos54∘)(1+2cos162∘)(1+2cos486∘). Reduce angles: cos162∘=−cos18∘, cos486∘=cos126∘=−cos54∘. This simplifies to (1+2cos18∘)(1−2cos18∘)(1+2cos54∘)(1−2cos54∘)=(1−4cos218∘)(1−4cos254∘).

Use exact values: cos36∘=5+14, cos72∘=5−14. Then 1−4cos218∘=−1−2cos36∘=−3−52 and 1−4cos254∘=−1+2cos72∘=−3+52.

Their product is (3+5)(3−5)4=9−54=1. Thus the original expression equals 36×1=36.

(The previously keyed option B encodes the error of obtaining product 12 instead of 1 before multiplying by 36.)

Correct option: D

Watch the full solution, worked step by step.

What is the answer to the trigonometric identities JEE 2023 product?

The answer to this trigonometric identities JEE 2023 question is 36, correct option D. From JEE Main Mathematics, 24 January 2023, morning shift, the problem asks you to evaluate the product obtained by multiplying 36 by four cosine-squared factors:

36(4cos29∘−1)(4cos227∘−1)(4cos281∘−1)(4cos2243∘−1).

The question bank tags it Hard and gives an expected solving time of 180 seconds. These are the bank’s labels, not an official difficulty classification or time limit.

Double the angles, reduce them and pair conjugate factors. Evaluating the original cosines directly is unnecessary.

Why should you double the angles first?

Doubling exposes supplementary angles whose cosines have opposite signs. The supplied official solution uses this structure: change the form of every factor before attempting any exact-value calculation.

Define the four-factor product without the leading multiplier:

P=(4cos29∘−1)(4cos227∘−1)(4cos281∘−1)(4cos2243∘−1).

The required answer is: 36P.

Start from the double-angle identity and rearrange: cos2θ=2cos2θ−1,

4cos2θ−1=2(1+cos2θ)−1=1+2cos2θ.

The doubled angles are:

18∘,54∘,162∘,486∘.

Therefore,

P=(1+2cos18∘)(1+2cos54∘)(1+2cos162∘)(1+2cos486∘).

Do not expand these four brackets. Reduce the angles first to expose the matching cosine terms.

How do the reduced angles create conjugate pairs?

The third cosine is the negative of the first, and the fourth is the negative of the second. Angle reduction therefore turns the four factors into two conjugate pairs, each handled by a difference of squares.

For the third factor, use the supplementary-angle identity:

162∘=180∘−18∘,cos162∘=−cos18∘.

For the fourth, first remove a complete revolution, then use the same identity:

486∘=360∘+126∘,126∘=180∘−54∘,
cos486∘=cos126∘=−cos54∘.

Reorder the factors:

P=(1+2cos18∘)(1−2cos18∘)(1+2cos54∘)(1−2cos54∘).

Apply the conjugate-product identity separately to both pairs:

(a+b)(a−b)=a2−b2,
(1+2cos18∘)(1−2cos18∘)=1−4cos218∘,
(1+2cos54∘)(1−2cos54∘)=1−4cos254∘.

Thus,

P=(1−4cos218∘)(1−4cos254∘).

The second-quadrant minus signs create the useful pairing. They let us eliminate the linear cosine terms without evaluating them.

How do the exact values give 36?

The two reduced factors multiply to one, so the original multiplier remains unchanged. The official method uses these two exact values:

cos36∘=5+14,cos72∘=5−14.

Apply the double-angle identity again to the first reduced factor. Substitute the exact value after simplifying the constant term:

1−4cos218∘&=−1−2cos36∘&=−1−5+12&=−3−52.

For the second factor, doubling produces an obtuse angle. Reduce that angle before substituting:

1−4cos254∘=−1−2cos108∘,
108∘=180∘−72∘,cos108∘=−cos72∘.

The two minus signs give a positive cosine term:

1−4cos254∘&=−1+2cos72∘&=−1+5−12&=−3+52.

Sign check: both reduced factors are negative because the square root of five is less than three. Their product must be positive, though this check alone does not establish its magnitude.

Multiply the numerators and denominators separately:

P=(−3−5)(−3+5)2×2=9−54=1.

Recover the leading multiplier:

36P=36×1=36.

The correct answer is option D. Keep the multiplier outside the algebra until this last step to make the four-factor product easier to track.

How can an extra half produce 18 instead of 36?

An extra division by two halves the product and produces 18, the erroneous result associated with option B in the supplied solution note. This is an illustrative error route, not a documented account of how students answered.

The valid half-angle substitution is:

1−4cos254∘=1−4[1+cos108∘2]=−1−2cos108∘.

An incorrect continuation retains another denominator:

Incorrect second factor: −1−2cos108∘2.

The identity’s denominator has already been absorbed: 42=2.

Keeping it again halves the second factor and therefore the whole product:

Pwrong=12P=12,36Pwrong=36×12=18.

Repair rule: simplify numerical coefficients immediately after substituting an identity, and keep each denominator attached to its own expression. The correct final radical calculation has matching denominator and numerator:

Denominator=2×2=4,Numerator=9−5=4.

How do you apply the pairing strategy to two new products?

Double first when the factors contain cosine squared; pair immediately when the cosine terms already have supplementary angles. The two exercises below test these choices and are original practice from the same chapter, not additional verified JEE PYQs.

Attempt each expression before reading its worked answer. Write the angle relationship before substituting radicals.

How do you evaluate the product involving 15° and 75°?

Doubling reveals a supplementary pair, so the transformed factors are conjugates. Question 1: evaluate:

(4cos215∘−1)(4cos275∘−1).

Worked answer: apply the double-angle transformation to each bracket, then reduce the second cosine.

&(1+2cos30∘)(1+2cos150∘)&=(1+3)(1−3)&=1−3=−2.

How do you evaluate the product involving 36° and 144°?

These angles are already supplementary, so pair before doubling. Question 2: evaluate:

(1+2cos36∘)(1+2cos144∘).

Worked answer: reduce the second cosine, use a difference of squares, then substitute the same exact value used in the PYQ. cos144∘=−cos36∘,

(1+2cos36∘)(1−2cos36∘)&=1−4cos236∘&=−1−2cos72∘&=−1−5−12&=−1+52.

Redo the original question without looking back. Keep both radical denominators visible until the final multiplication, then check that their product is four.

Next step: photograph a doubt on JEEnius and photograph any question you are stuck on and get a step-by-step solution, with a free-body diagram when the question needs one (20 free).

For a worked example of the same idea, see D- and f-Block Elements JEE 2016: Silver–Thiosulphate.

Frequently asked questions

What is the answer to the JEE Main 2023 cosine product question?

The answer is 36, option D, for the question from JEE Main Mathematics, 24 January 2023, morning shift. The four factors involving 9°, 27°, 81° and 243° multiply to 1, leaving the leading multiplier 36 unchanged.

Which identity should I use first for 4 cos²θ − 1?

Use the double-angle identity to write 4 cos²θ − 1 = 1 + 2 cos 2θ. In this question, doubling and reducing the angles creates conjugate pairs that simplify using (a + b)(a − b) = a² − b².

Why is cos 486° equal to −cos 54°?

Subtract one complete revolution to get cos 486° = cos 126°. Since 126° = 180° − 54°, the supplementary-angle identity gives cos 126° = −cos 54°.

Why am I getting 18 instead of 36 in this question?

One possible error is retaining an extra denominator of 2 after substituting cos²54° = (1 + cos108°)/2. The coefficient 4 already absorbs that denominator, giving 1 − 4 cos²54° = −1 − 2 cos108°. Dividing this factor by 2 again incorrectly halves the final answer from 36 to 18.

cosine productsdouble-angle identitiesjee main 2023jee mathematicstrigonometric identities

Practise this with JEEnius AI

25 years of PYQs and AI doubt solving, plus 10 free 2027 predicted questions.

Start practising free